Welcome

Built-in-two-port, 10/100/1000 Ethernet switch - lets you share a connection with your computer.

Inline power support (based on 802.3af standard) which eliminates power adapters.

AC power adapter (included)

Enhanced busy lamp fields*

Set paging*

* Availability of feature dependant on your phone system or service provider.

Requirements

The 6757i IP Phone requires the following environment:

SIP-based IP PBX system or network installed and running with a SIP account created for the 6757i phone.

Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets Layer (SSL) (HTTPS).

Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN (1000 Mbps) recommended)

Category 5/5e straight through cabling (category 6 straight through cabling required for optimum Gigabit Ethernet performance)

Power source

For Ethernet networks that supply in-line power to the phone (IEEE 802.3af):

For power, use the Ethernet cable (supplied) to connect from the phone directly to the network for power. (No 48v AC power adapter required.)

For Ethernet networks that DO NOT supply power to the phone:

For power, use the 48V AC Power Adapter (included) to connect from the DC power port on the phone to a power source.

or

(optional) For power, use a Power over Ethernet (PoE) power injector or a PoE switch. A PoE power injector is available as an optional accessory from Aastra Telecom. Contact your Administrator for more information.

Installation and Setup

If your System Administrator has not already setup your 6757i phone, please refer to the Aastra 6757i Installation Guide for basic installation and physical setup information. For more advanced administration and configuration information, System Administrators should refer to

the Aastra Models 9000i and 6700i Series SIP IP Phones Administrator Guide.

2

Model 6757i IP Phone User Guide

Page 8
Image 8
Aastra Telecom 6757I manual Requirements, Installation and Setup