State-Based Softkeys (Bottom Keys only)
On the 6757i bottom softkeys, you can configure a specific state to display when a softkey is being used.
None | None |
None | None |
None | None |
Softkeys
The following table describes the states available to configure for the softkeys.
State | Description |
|
|
idle | The phone is not being used. |
|
|
connected | The current line is in an active call (or the call is on hold). |
|
|
incoming | The phone is ringing. |
|
|
outgoing | The user is dialing a number, or the |
|
|
busy | The current line is busy because the line is in use or the line is set as “Do Not Disturb”. |
|
|
The following table identifies the applicable default states for each softkey type on the IP phone.
Softkey Type | Default States |
|
|
None | All states disabled. |
|
|
Line | idle, connected, incoming, outgoing, busy |
|
|
Speed Dial | idle, connected, incoming, outgoing, busy |
|
|
DND | idle, connected, incoming, outgoing, busy |
|
|
BLF | idle, connected, incoming, outgoing, busy |
|
|
BLF List | idle, connected, incoming, outgoing, busy |
|
|
Auto Call Distribution (ACD) | idle |
|
|
Directed Call Pickup (DCP) | idle, connected, incoming, outgoing, busy |
Group Call Pickup (GCP) |
|
|
|
XML | idle, connected, incoming, outgoing, busy |
|
|
Line Keys and Softkeys
Model 6757i IP Phone User Guide | 65 |