11. Click on Basic Settings->Account Configuration.
The illustration above shows 3 accounts configured on the phone. Accounts must be set up by your System Administrator.
12.For each account, enable the CFWD state by placing a check mark in one or more of the following “State” fields:
•All
•Busy
•No Answer
The “All” option forwards all incoming calls for this account to the specified phone number regardless of the state of the phone. The phone can be in the Busy or No Answer states, or can be in the idle state. The phone still forwards all calls to the specified number.
The “Busy” option call forwards incoming calls only if the account is in the busy state. The calls are forwarded to the specified phone number.
The “No Answer” option call forwards incoming calls only if the account rings but is not answered in the defined number of rings. The call gets forwarded to the specified number.
Note: You can use the “Busy” and “No Answer” states together using different forwarding phone numbers. If these states are enabled for an account (the “All” state is disabled), and the phone is in the busy state when a call comes in, the phone can forward the call to the specified phone number (for example, voicemail). If there is no answer on the phone after the specified number of rings, the phone can forward the call to a different specified number, such as a cell phone number.
13.For each account, in the “Number” field, enter the phone number for which you want the incoming calls to forward to if the phone is in the specified state.
