Creating a Speed Dial Key Using the Sofkeys or Expansion Module Keys

Aastra Web UI

Use the following procedure to set a key to function as a speed dial. The procedure shows the softkey screens as an example.

1.Click on Operation->Softkeys and XML. or

Click on Operation->Expansion Module <N>.

Softkeys

2.Select from “Key 1” through “Key 10” on the Top keys. or

Select from "Key 1" through "Key 20" on the Bottom keys.

3.In the "Type" field, select Speed Dial to apply to the key.

4.In the "Label" field, enter a label to apply to this key.

5.In the "Value" field, enter the phone number, extension, or speed dial prefix to apply to this key. If you enter a speed dial prefix, you must enter the "+" character at the end of the prefix number (for example, "123456+").

6.In the "Line" field, select a line to apply to this key. Valid values are 1 through 9.

7.(Bottom Softkeys) In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.

Line Keys and Softkeys

Model 6757i IP Phone User Guide

77

Page 83
Image 83
Aastra Telecom 6757I manual Softkeys