ADC Telecommunications, Inc.
106 CHAPTER 6: MODULE ADMINISTRATION
Viewing Module Information
This section provides information on how to view module information,
including:
■Viewing Installed Modules
■Viewing Module Versions

Viewing Installed Modules

You can display a listing of modules and their associated interfaces currently
installed on the system by using the show topology command. To show the
current physical configuration of the system, perform the following task
from within any mode:
You can pipe the output to an include utility to scope the display down to
content of interest. For example, the command show topology | include
Ethernet will scope the output to only Ethernet interfaces. Note that th e
string you specify is case-sensitive.
Task Command
Display system topology,
including module and
interface information.
show topology