ADC 3 Enabling and Disabling IP Packet Filtering

Cuda 12000 IP Access Switch CLI-based Administration Guide
Enabling and Disabling IP Packet Filtering 329
Enabling and Disabling IP Packet Filtering
Whenever you apply an access-list to an interface using the access-class
command IP filtering is automatically enabl ed.
You can disable IP filtering so that all packets are permitted to cross the
interface. You must disable access lists manually; IP filtering is n ot
automatically disabled when access lists are removed.
For each interface, you can enable filtering of incoming packets, as well as
outgoing packets. To do so, perform the following tasks within interface
<c/s/i> mode:
Task Command
1. Enable packet filtering on the
current interface.
ip filter {in | out} enable
2. Disable packet filtering on the
current interface.
ip filter {in | out} disable