Cuda 12000 IP Access Switch CLI-based Administration Guide
DHCP and BOOTP Policies 257
To remove DHCP or BOOTP policies from the current cable interface, perform the following tasks within interface cable <c/s/i> mode:
Task Command
1. Remove all DHCP policies from the
current cable interface.
no dhcp-policy all
2. Remove all BOOTP policies from
the current cable interface.
no bootp-policy all
3. Remove a specified DHCP policy
from the current cable interface.
no dhcp-policy <policy number>
4. Remove a specified BOOTP policy
from the current cable interface.
no bootp-policy <policy number>