ADC 3 Modifying Existing Filter Groups

ADC Telecommunications, Inc.
504 CHAPTER 20: SUBSCRIBER MANAGEMENT
Modifying Existing Filter Groups
You may replace the source matching criteria for an existing filter group. To
do so, perform the same tasks as listed on page500. For example:
1. Enter root mode.
2. Issue the show cm-filter command to identify the filter group you want
to modify.
3. Perform Task 2 on page500.
4. Complete Tasks 3 through 8 on page 500 by specifying the new source
matching criteria to replace the existing criteria for the filter group.