ADC Telecommunications, Inc.
316 CHAPTER 14: CONFIGURING IP
For more information on these commands, refer to the Cuda 12000 IP
Access Switch CLI Reference Guide.
7. Configure the authentication typ e.
Authentication is optional. If you
choose to implement authentication,
the OSPF neighbors on the virtual
interface must all implement the
same authentication type.
ospf-vi <transit-area-id>
<neighbor-router-id> authentication {md5 |
password}
Note that:
■Specify “md5” to configure MD5 password
authentication; “password” to configure
simple password authentication.
■Use this command to disable
authentication for the virtual interface:
no ospf-vi <transit-area-id>
<neighbor-router-id> authentication
8. Configure the authentication key .
Authentication is optional. If you
choose to implement authentication,
all OSPF neighbors on the virtual
interface must use the same
password (for simple password) or
key and corresponding key ID (for
MD5).
ospf-vi <transit-area-id>
<neighbor-router-id> authentication {key-id
<id> key <key> | key <key>}
Use the key-id <id> key <key> argument with
MD5; use the key <key> argument with
password.
9. Verify the OSPF virtual interface
configuration.
show ospf interface virtual
10.Verify OSPF virtual neighbors. show ospf neighbor virtual
Task Command