Cuda 12000 IP Access Switch CLI-based Administration Guide
Configuring Static Routes 283
Deleting the Default Route

To add the default route, perform the following task:

Example
cli:192.168.208.3:root# show ip
row count: 8
Protocol Route Destination Net Mask Next Hop Metric C/S/I
Type
-------- ------ --------------- --------------- --------------- ------ ------
Net Mgmt Remote 0.0.0.0 0.0.0.0 201.1.1.10 1 1/1/1
Local Local 155.144.1.0 255.255.255.0 155.144.1.1 0 1/8/1
Local Local 199.3.1.0 255.255.255.0 199.3.1.1 0 131/1/1
Net Mgmt Remote 199.3.2.0 255.255.255.0 199.3.1.3 1 131/1/1
Local Local 201.1.1.0 255.255.255.0 201.1.1.1 0 1/1/1
Local Local 201.1.2.0 255.255.255.0 201.1.2.1 0 1/1/1
Local Local 222.2.2.0 255.255.255.0 222.2.2.2 0 1/11/1
Net Mgmt Remote 222.2.3.0 255.255.255.0 222.2.2.1 1 1/11/1
cli:192.168.208.3:root# no ip route default
cli:192.168.208.3:root# show ip
row count: 7
Protocol Route Destination Net Mask Next Hop Metric C/S/I
Type
-------- ------ --------------- --------------- --------------- ------ ------
Local Local 155.144.1.0 255.255.255.0 155.144.1.1 0 1/8/1
Local Local 199.3.1.0 255.255.255.0 199.3.1.1 0 131/1/1
Net Mgmt Remote 199.3.2.0 255.255.255.0 199.3.1.3 1 131/1/1
Local Local 201.1.1.0 255.255.255.0 201.1.1.1 0 1/1/1
Local Local 201.1.2.0 255.255.255.0 201.1.2.1 0 1/1/1
Local Local 222.2.2.0 255.255.255.0 222.2.2.2 0 1/11/1
Net Mgmt Remote 222.2.3.0 255.255.255.0 222.2.2.1 1 1/11/1

Task Command

From any mode, delete the default

route.

no ip route default