Cuda 12000 IP Access Switch CLI-based Administration Guide
About Timing and Alarm Controller Fault Reporting 149
Configuring power and fan tray fault reporting involves performing the
following tasks:
■You must specify whether the auxiliary device utilizes an active-high or
active-low assertion level to report fault conditions, as described in
“Assertion Levels” on page150.
■Configure the faults that you want the system to report, as described in
“Configuring Fault Reporting” on page 153.
■Specify the alarms that you want to send over the alarms out DB-15
connector to an external indication device, as described in “Configuring
Alarms Out” on page157.