ADC 3 SNMP Commands

ADC Telecommunications, Inc.
584 APPENDIX A: COMMAND SUMMARY
SNMP Commands
Table A-13 SNMP Commands
Command Mode Description
snmp-server community
<community-name>
<security-name>
[address <ip-address>
[mask <ip mask>]]
[context <context>]
[storage {volatile | nonvolatile |
permanent | readonly}]
root Creates an SNMP community.
snmp-server contact <contact> root Specifies the SNMP contact for the
network.
snmp-server context
<context-name> [storage {volatile |
nonvolatile | permanent | readonly}]
[status {enable | disable}]
root Creates an SNMPv3 context.
snmp-server group <group-name>
{v1 | v2c | v3 {auth | noauth | priv}}
[read <readview-name>] [write
<writeview-name>] [notify
<notifyview-name>] [context
<context-name>] [storage {volatile |
nonvolatile | permanent | readonly}]
root Creates an SNMP group.
snmp-server host <ip-address>
<community-name> {traps | informs
[timeout <seconds>] [retries
<retries>]} [version {1 | 2c | 3 {auth |
noauth | priv}}] [udp-port <port>]
[mms <size>] [storage {volatile |
nonvolatile | permanent | readonly}]
[notification-type <type>...]
root Creates an SNMP host to receive
trap messages.
snmp-server location <location> root Specifies the physical location of
the Cuda 12000.
snmp-server name <name> root Specifies the system name.
snmp-server user <user> [auth {md5
| sha} <auth-password> [priv des56
<priv-password>]] [storage {volatile |
nonvolatile | permanent | readonly}]
[status {enable | disable}]
root Creates an SNMPv3 user for the
SNMP entity.