ADC Telecommunications, Inc.
42 CHAPTER 2: ABOUT THE COMMAND LINE INTERFACE
Global Commands

Global commands can be used anywhere in the CLI, regardless of your

current command mode. Table2-1 lists global commands as they appear

when you type help at the command prompt. Note that the help command

output displays many commands in their abbreviated form.

Tabl e 2 -1 Glob al Commands
Command Description
basmonitor Starts the system monitor.
boot Enables, disables, or reboots a module in an
application slot.
clear Clears a specified system resource (depending on the
specified argument), such as ARP cache or statistics
counters.
cm-filter-default Sets the default cable modem filter values for the
system.
cpe-control Sets the default subscriber management values for the
system.
connect Connects you to another Cuda 12000 IP Access Switch
chassis.
echo Echoes a comment so that it displays.
enable Enables a user session.
help Displays CLI command help.
interface Changes you to interface mode.
ip Configures IP parameters for the system.
no Specifies the no form of a command.
ping Enables you to the send an ICMP echo request packet
to a destination to determine if it is reachable.
prov-server Changes you to provisioning server mode. This
command is useful only if the FastFlow Broadband
Provisioning Manager is installed on your Cuda 12000
IP Access Switch.
qShortened form of quit.
quit Enables you to exit from the CLI.
root Changes you to root mode.
router Changes you to router mode.