Cuda 12000 IP Access Switch CLI-based Administration Guide
Packet Over SONET (POS) Commands 585
Packet Over SONET (POS) Commands

Table A-14 POS Commands

snmp-server view <view-name>
<oid-tree> {included | excluded}
[storage {volatile | nonvolatile |
permanent | readonly}] [status
{enable | disable}]
root Creates an SNMP MIB view.
Command Mode Description
Command Mode Description
clear counters interface:pos:csi Clears all counters on the current
POS interface.
clock-source {line | internal} interface:pos:csi Configures the SONET
transmission clock source.
crc {16 | 32} interface:pos:csi Configures cyclic redundancy error
checking on the current POS
interface.
loop {line | internal} interface:pos:csi Configures loopback testing on
the current POS interface.
mtu <value> interface:pos:csi Sets the maximum transmission
unit (MTU) for the interface.
pos flag {c2 | j0} <value> interface:pos:csi Sets values for the c2 and j0
SONET overhead bytes on the
current POS interface.
pos report lais interface:pos:csi Configures the POS interface to
report line alarm indication signal
errors.
pos report lrdi interface:pos:csi Configures the POS interface to
report line remote defect
indication errors.
pos report pais interface:pos:csi Configures the POS interface to
report path alarm indication signal
errors.
pos report plop interface:pos:csi Configures the POS interface to
report path loss of pointer errors.
pos report prdi interface:pos:csi Configures the POS interface to
report path remote defect
indication errors.