Cuda 12000 IP Access Switch CLI-based Administration Guide
Route Filter Configuration Example 241

The following example creates a RIP import filter by adding route maps 1, 2,

and 3 to the a map list number 20 and designates it as the active list to use

for RIP imports.

Route Filter Configuration Example

The following example creates two RIP import route-maps and adds them to

map-list 1:

cli:172.16.19.10:root# router rip
mode: router:rip
cli:172.16.19.10:router:rip# import
mode: router:rip:import
cli:172.16.19.10:router:rip:import# map-list 2 route-map 1
cli:172.16.19.10:router:rip:import# map-list 2 route-map 2
cli:172.16.19.10:router:rip:import# map-list 2 route-map 3 set active
cli:172.16.19.10:router:rip:import#
cli:172.16.19.10:root# router rip
mode: router:rip
cli:172.16.19.10:router:rip# import
mode: router:rip:import
cli:172.16.19.10:router:rip:import# route-map 10 permit
cli:172.16.19.10:router:rip:import:route-map(10)# match ip-address 172.16.19.0
255.255.255.0
cli:172.16.19.10:router:rip:import:route-map(10)# override metric 10
cli:172.16.19.10:router:rip:import:route-map(10)# route-map 11 deny
cli:172.16.19.10:router:rip:import:route-map(11)# match ip-address 172.16.19.23
255.255.255.255
cli:172.16.19.10:router:rip:import:route-map(11)# map-list 1 route-map 11
cli:172.16.19.10:router:rip:import:route-map(11)# map-list 1 route-map 10
cli:172.16.19.10:router:rip:import:route-map(11)# map-list 1 set active
cli:172.16.19.10:router:rip:import:route-map(11)# show map-list 1
row count: 3
Template Template Row Status
Order
-------- -------- --------------
1 1 Active
10 3 Active
11 2 Active
cli:172.16.19.10:router:rip:import:route-map(11)#