ADC 3 Displaying Multicast Routes

ADC Telecommunications, Inc.
366 CHAPTER 17: MANAGING IP MULTICAST
Displaying Multicast Routes
Use this procedure to display multicast routes:
When issued with the summary argument, the command provides this
information:
■MRoute Group — IP Multicast group address that contains the multicast
routing information.
■Up Time — Time in hours, minutes, and seconds since the multicast
routing information was learned.
When issued with no argument or the <group-address> argument, the
command provides this information in addition to the summary info rmation:
■Outgoing Interface — Interface on which the multicast route is learned
or joined.
■Outgoing Interface Up Time — Time in hours, minutes, and seconds
since the multicast routing information was learned.
Task Command
1. Enter root mode or interface
mode.
enable root
or
interface <c/s/i>
2. Display summary information on
multicast routes, details on
multicast routes, or details on a
specific multicast route.
show ip igmp mroute
{<group-address> | summary}