Cuda 12000 IP Access Switch CLI-based Administration Guide
Configuring OSPF 307
Example
The following example enters IP address configuration mode for interface 1/1/1 and assigns the interface an area ID of 1.1.1.1.
cli:172.16.19.10:root# router ospf
mode: router:ospf
cli:172.16.19.10:router:ospf# ospf area 1.1.1.1
cli:172.16.19.10:router:ospf# interface 1/1/1
mode: interface:cable:csi(1/1/1)
cli:172.16.19.10:interface:cable:csi(1/1/1)# ip address 172.16.9.8
255.255.255.0
cli:172.16.19.10:interface:cable:csi(1/1/1):ip-address(172.16.9.8)# ip ospf
area-id 1.1.1.1
cli:172.16.19.10:interface:cable:csi(1/1/1):ip-address(172.16.9.8)# show ip
ospf
IP Address 172.16.9.8
Area ID 1.1.1.1
Type Bcast
Priority 5
Transit Delay 1
Retrans Int 5
Hello Int 10
Dead Int 40
Poll Int 0
Admin Stat Enabled
Status Active
Auth Type None
Auth Key Id 0
Cost 1