ADC Telecommunications, Inc.
124 CHAPTER 7: PACKET OVER SONET ADMINISTRATION
Viewing POS Interface Packet Statistics
You can view incoming and outgoing packet statistics for se lected POS
interfaces. These traffic statistics provide a snapshot overview as to the
amount and type of traffic flowing across the interface.
For each POS interface, incoming and outgoing statistics are shown for the
physical SONET layer, the Path layer, and at the PPP layer. To display these
statistics, perform the following tasks:
The following incoming statistics are displayed for the SONET, Path, and PPP
layer on each POS interface:
■In Octets — Total number of PPP negotiations octets that have been
received on this interface. This does not include octets for data packets.
■In Unicast Packets — Number of Unicast packets that have been
received on this interface.
■In Multicast Packets — Number of Multicast packets that have been
received on this interface.
■In Broadcast Packets — Number of Broadcast packets that have been
received on this interface.
Task Command
1. From within root mode, issue this
command to display incoming
statistics:
show interface pos <c/s/i>
in-counters
2. From within interface mode, issue
this command to display incoming
statistics:
show in-counters
3. From within root mode, issue this
command to display outgoing
statistics:
show interface pos <c/s/i>
out-counters
4. From within root mode, issue this
command to display outgoing
statistics:
show out-counters