ADC Telecommunications, Inc.
56 CHAPTER 2: ABOUT THE COMMAND LINE INTERFACE
Slot Mode
Slot mode provides access to slot-specific commands. To enter this mode,
you must specify a chassis/slot (c/s) combination that identifies the slot that
you want to administer. Within this mode, you can do the following:
■Persist (save) configuration for the current module, or all modules in the
system
■Configure and show trace log activity for the current slot
■Reset the module contained in the slot, or all modules in the chassis.
To enter slot mode, enter slot <chassis/slot> from within any mode.
Table2-9 lists available slot mode commands as they appear when you type
help at the command prompt. CLI global commands are not listed and can
be found in Table 2-1 on page 42. Note that the help command output
displays many commands in their abbreviated form.
Tabl e 2 -9 Slot Mode Commands
Command Description
copy Downloads a file from a TFTP server to flash.
cpu-utilization Enables CPU utilization on the module.
filter-aging Configures IP packet filtering for all interfaces in the
slot.
reset Reboots a module.
save Saves the system configuration for all slots to pers istent
storage.
trace-log Configures event logging for the slot.