Agilent Technologies E6385A Fyyhg Yu, Vy Ohg Yu id, Py hy gyudP gyu dPu y hy gy, 94A VOhg Yu i d

Installation

Operating the BTS Laptop Utility Program

g fyyhg Yu

Oq —sp WH ozp” yz— xpp— —sp qzwwz©tyr xtytx±x ”—px •p–±t•pxpy—”0 —st” nz±wo nl±”p p••l—tn z“p•l—tzy lyo wzyrp• —p”— —txp”2

•166-MHz Pentium Processor

•16 megabytes of RAM

•Windows® 95, Windows 98, or Windows NT 4.0 (Intel based)

•Available RS-232 serial port

•Internal modem

Vy Ohg Yu id

The BTS Laptop Utility program comes compressed on two install diskettes for easy setup on the PC. Simply insert the first diskette into the drive, select Start then Run, then type A:\Setup. The install shield will lead you through the installation process (see Figure 2-5).

S 94A VOhg Yu i d

Py hy gyudP gyu dPu y hy gy

After installing the BTS Laptop Utility program, you must configure the Test Set and PC serial ports to communicate with the Test Set.

Configure the serial ports as follows:

gy 85 On the Test Set, determine and record the Test Set SERIAL 9 port data transfer (baud) rate as follows:

•Load and run the Test Software (see“Loading and Running the Test Software” on page 23). The Test Software will display the Lucent AMPS Tests Main Menu screen.

•Select the Serial Port Configuration field. The Test Software will display the Serial Port Configuration Menu screen.

•Select the Serial 9 Port Configuration field. The Test Software will display the Serial 9 Port Configuration Menu screen.

28 Chapter 2

O:\Manuals\E6385A_Amps\Book\install.fm