Agilent Technologies E6385A manual Defining a Frequency Plan on Printing the FCC Title Page on

Performing Tests

Overview

gy

Zpwpn— nlwtm•l—tzy lyo ”±““z•— ±—twt—tp” m wzlotyr lyo •±yytyr —sp [p”— Zzq—©l•p ,”pp “Loading and Running the Test Software” on page 23) and selecting the Calibration/Utilities field on the Lucent CDMA Tests Main Menu screen. The Test Software will display the Calibration/Utilities Menu screen (see Figure 4-3).

S ?4: Puyy

Once you have selected a calibration procedure to run, see the following list to locate the description of that procedure.

•“TX Antenna Port Cable Calibration” on page 84.

•“TX Test Port Cable Calibration” on page 86.

•“TX Test Port Coupling Measurements” on page 88.

•“Insertion Loss Measurement” on page 91.

•“Return Loss Measurement” on page 93.

Once you have selected a support utility procedure to run, see the following list to locate the description of that procedure.

•“Defining a Frequency Plan” on page 43.

•“Printing the FCC Title Page” on page 41.

Performing Tests

Chapter 4 63