1Introducing the FrameScope Pro
Safety Considerations
Safety Considerations
The following general safety precautions must be observed during all phases of operation, service, and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument.
Agilent Technologies Inc. assumes no liability for the customer’s failure to comply with these requirements.
Before operation, review the instrument and manual, including the red safety page, for safety markings and instructions. You must follow these to ensure safe operation and to maintain the instrument in safe condition.
This instrument is intended for indoor use.
This product is a Safety Class 1 instrument. Product is powered by an AC/DC adapter.
The protective features of this product may be impaired if it is used in a manner not specified in the operation instructions.
All Light Emitting Diodes (LEDs) used in this product are Class 1 LEDs as per IEC
Environmental conditions
Refer to the Specificatins chapter, Environmental section.
Before applying power
Verify that the product is set to match the available line voltage, and all the safety precautions are taken.
Do not operate in an explosive atmosphere
Do not operate the instrument in the presence of flammable gases or fumes
Do not remove the instrument cover
Operating personel must not remove instrument covers. Component replacement and internal adjustments must be made only by qualified service personel. Instruments that
10 | Agilent FrameScope Pro User’s Manual |
