Network Testing with the FrameScope Pro | 2 |
Performance Tests
The IP address of the FrameScope (for loopback scenarios, MAC address). If the name exists, it will be displayed.
The throughput/ latency test set, according to frame size. Press the left or right button to go to the previous or next test set respectively.
Upstream - throughput rates of frames sent from master FrameScope.
Downstream - throughput rates of frames sent from slave FrameScope.
(For bidirectional, single throughput rates for both direction will be plotted.)
Max - maximum theoretical frame rate.
Below frame directions are frame throughput rates in frames per
Click this to change the Y axis in the chart display.eg., display changes in fps, bps,% (only for throughput results)
The minimum, average and maximum delay of frame obtained from an average of multiple measurements depending on the number of iterations set.
Agilent FrameScope Pro User’s Manual | 69 |
