Agilent Technologies N2620A user manual AC Line Power Supply Requirements, Line power cable

1Introducing the FrameScope Pro

Safety Considerations

WA RN I N G

Please pay attention to the following laser safety warnings:

1.Under no circumstances look into the end of an optical cable attached to the optical output when the device is operating. The laser radiation can seriously damage your eyesight

2.Do not enable laser when there is no fiber attached to the optical output connector.

3.The use of optical instruments with this product will increase eye hazard.

4.The laser module has a built-in safety circuitry which will disable the optical output in the case of a fault condition

5.Refer servicing only to qualified and authorised personnel.

AC Line Power Supply Requirements

The Agilent FrameScope Pro can operate through the supplied AC adapter between 100V and 240V ± 10%, at a frequency in the range from 50 to 60Hz ± 5%. The maximum power consumption is 30VA.

Line power cable

The type of power cable shipped with each instrument depends on the country of destination.

12 Agilent FrameScope Pro User’s Manual