2Network Testing with the FrameScope Pro
Network Testing Overview
Network Testing Overview
The following steps describe the general procedure for performing network analysis testing using the FrameScope Pro.
1Power the unit on. See “Switching the FrameScope On and Off” on page 19.
2Connect to the network under test. See “Connecting to the Network and Using the FrameScope Pro” on page 22.
The FrameScope automatically begins to poll the network and locate devices. See “Examining the Network” on page 27.
3View details about the detected network resources. See “Detailed List” on page 28.
4Perform an Autotest on any or all desired resources. See “Running an Autotest” on page 29.
5Select any devices on the network and perform additional testing, such as:
•Ping test; see page 38.
•Trace Route test; see page 41.
•SNMP Queries; see page 44.
6Save results as desired, perform other tests or functions.
26 | Agilent FrameScope Pro User’s Manual |
