Network Testing with the FrameScope Pro | 2 |
Performance Tests
password. You will get a warning, “Permission Denied”, if a password is set in the slave FrameScope and not entered correctly in the master FrameScope.
8Press Start to begin test.
After pressing the Start button, the master FrameScope starts the activation and synchronization procedures with the target FrameScope by doing the following actions:
9Search (if enabled) and check status of the slave FrameScope
10Activate the slave FrameScope if in idle mode
11Authenticate the master FrameScope if the password is enabled
12Set up the slave FrameScope parameters by synchronizing the master and slave FrameScope for the test
13Start test
14Query test results at end of test
15Stop test
If the target selected is loopback device, all the test setup is done in the master device. There will be no authentication synchronization setup.
Setting the slave FrameScope for RFC 2544 Tests
1From the Network main menu, press
System.
Agilent FrameScope Pro User’s Manual | 65 |
