1Introducing the FrameScope Pro
Getting Started
Checking Power and Charging the Battery
The FrameScope’s battery should provide enough power for a typical day of testing. The AC power adapter/charger can also be used to power the unit and to recharge the battery.
N O TE | To shorten the charging time, Agilent recommends switching off the | |
FrameScope while charging. | ||
| ||
| To check the battery’s charge level, perform these steps: | |
| 1 Switch on the FrameScope, if necessary, by pressing the | |
| Power button on the front of the unit. | |
| 2 Observe the battery icon in the Status display area on the | |
| Main Menu. | |
| The battery icon will show how much charge remains in the | |
| battery (for example, 45%). If the battery is severely depleted, | |
| a | |
| Do not operate the FrameScope while the battery is hot | |
WA RN I N G | ||
immediately after charging. | ||
| ||
| When the battery temperature exceeds 55ºC (131ºF), a warning | |
| message, for example, “FrameScope too hot”, will appear to alert | |
| the user. | |
| 3 To recharge the battery or to power the FrameScope from an | |
| AC power source, plug the DC power connector on the | |
| adapter/charger into the 12 V DC connector on the side of | |
| the battery |
20 | Agilent FrameScope Pro User’s Manual |
