Network Testing with the FrameScope Pro | 2 |
Running an Autotest
For more details, see “Network Performance Autotest” on page 129.
7When you have finished setting up the test, press the Start Test button (or press OK) on the Network Autotest Setup screen. The test will begin.
8To stop the test at any time press the
Stop Test button.
9To view information about a network element’s results, select the element from the list and press the Details button.
10Press the Save Results button to store the test data on the CompactFlash™ card.
The rating numbers will range from 5 to 1, where 5 is best and 1 is worst. A red ‘X’ will be displayed if an error occurred during the test. See the next section for how to change the metrics used to derive the ratings.
Agilent FrameScope Pro User’s Manual | 31 |
