4System Operations
Network Settings
•Default Gateway – This is the default gateway (router) the FrameScope will use to communicate with devices on other subnets.
Press Next when satisfied with your choices.
The second Network Settings Setup screen allows you to change the Host Name from the default, enter a DNS Domain, and to provide DNS and WINS server addresses.
Host Name This name will be used to identify the FrameScope in NetBIOS and FrameScope protocols. The name defaults to ‘FRSCOPE’ plus the last 3 hexadecimal digits of the MAC Address. It may be changed to any name desired.
DNS and NetBIOS Settings Devices on the network may be referred to by name. In the Domain Name System (DNS), the FrameScope asks DNS servers to convert the name to an IP address. When NetBIOS names are used, the FrameScope asks WINS servers to convert the name to an IP address. The DNS Domain and the DNS and
WINS servers can be learned through DHCP and may be entered manually by the user. If the user enters a DNS Domain, it will be used in place of the DHCP supplied value. If the user enters DNS or WINS servers, they will be used in preference to the DHCP supplied values.
When satisfied with all the settings, press Next to get the third
Network Settings Setup screen.
110 | Agilent FrameScope Pro User’s Manual |
