Follow the on-screen instructions and do not disturb
the setup during the calibration. Please note that
you should not start a calibration until both LED's
on the AutoCal module are lit. This will ensure accu-
rate calibration of the VNA.
Step 11. When the calibration is complete, press the Save/Re-
call key.
Step 12. Select SAVE then FRONT PANEL SETUP AND
CAL DATA TO SD CARD (middle and bottom left).
Step 13. Select a file or CREATE NEW FILE and press En-
ter.
If you are creating a new file, enter the filename and
select DONE when finished.

USING AUTOCAL AUTOCAL

10-12 37xxxE OM

.-
Measurement
Enhancement
Channels
Display
Save/
Recall
Menu
MENU SR2
SAVE
FRONT PANEL
SETUP IN
INTERNAL MEMORY
FRONT PANEL
SETUP AND
CAL DATA
TO SD CARD
FRONT PANEL
SETUP AND
CAL DATA
TO USB DRIVE
PRESS <ENTER>
TO SELECT
MENU SR1
SAVE/RECALL
FRONT PANEL
AND CAL DATA
SAVE
RECALL
PRESS <ENTER>
TO SELECT
FUNCTION