Anritsu 37xxxE 37xxxE OM A-215

37xxxE OM A-215
ALPHABETICAL LISTING S
MENU DESCRIPTION GPIB COMMAND
SET SCALING
OR PRESS
<AUTOSCALE>
None
–LINEAR MAG– None
RESOLUTION
XX.XXX U/DIV Sets the resolution for the vertical axis of the active channel’s displayed graph. Resolution can by set
incrementally using the keypad or rotary knob.
SCL; SCL?;
SCL2; SCL2?
REFERENCE VALUE
XXX.XXX pU Sets the value at the reference line for the active channel amplitude measurement on the displayed graph. The value
can be set in increments of 0.001 U using the keypad or
rotary knob.
OFF; OFF?
OFF2; OFF2?
REFERENCE LINE
XSets the reference line for the active channel’s amplitude measurement. This is the line about which the amplitude
expands with different resolution values. The reference line
can be set to any vertical division using the rotary knob.
REF; REF?;
REF2; REF2?
–PHASE– None
RESOLUTION
XX.XX °/DIV Sets the resolution for the vertical axis of the active channel’s displayed phase graph. Resolution can by set
incrementally using the keypad or rotary knob.
SCL; SCL?;
SCL2; SCL2?
REF VALUE
XXX.XX °
Sets the value by which the active channel’s phase
measurement is offset on the phase graph. The offset can
be set in increments of 0.01 degrees using the keypad or
rotary knob.
OFF; OFF?
OFF2; OFF2?
REFERENCE LINE
XSets the reference line for the active channel’s phase measurement
on the phase graph. This is the line about which the phase
expands with different resolution values. The reference line
can be set to any vertical division using the rotary knob.
REF; REF?;
REF2; REF2?
PHASE SHIFT
X.XX °
Sets the value by which the active channel’s phase
measurement is shifted on the phase graph. The shift can
be set in increments of 0.01 degrees using the keypad or
rotary knob. This is useful when phase data is near the 180
degree rollover value.
PHO; PHO?
PRESS <ENTER>
TO RESUME CAL On the CAL_SS9 menu, pressing the Enter key returns you to the calibration setup or sequence. None
Menu SS9 or CAL_SS9, Set Scaling 9