37xxxE OM A-129

ALPHABETICAL LISTING L
MENU DESCRIPTION GPIB COMMAND
SINGLE LIMITS None
–PHASE– None
UPPER LIMIT ON (OFF)
XXX.XXX °
Turns the Upper Limit line on or off for the active channel.
For your convenience, the arbitrarily set limit lines allow
you to delineate a go/no go line on your Phase display
beyond which the measured values are unacceptable.
UPL0; UPL1;
UPLX?
LOWER LIMIT ON(OFF)
XXX.XXX °
Turns the Lower Limit line on or off for the active channel
on your Phase display. LOL0; LOL1;
LOLX?
READOUT LIMIT Calls menu LF1, which shows points where the current
S-parameter intercepts the lower limit. None
DISPLAY ON (OFF)
LIMITS Enables both limit lines for the active channel on a phase
graph. LON; LOF; LON?
TEST LIMITS Calls menu LTST, which provides choices for testing the
limits. None
SEGMENTED LIMITS Calls a menu in the LS series (LSX), which lets you set
segmented limit lines. None
PRESS <ENTER>
TO SELECT
OR TURN ON/OFF
Pressing the Enter key implements your menu selection. None
Menu L5, Set Limits—Phase