A-160 37xxxE OM
M ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
MARKER READOUT
FUNCTIONS None
MARKERS ON
ACTIVE CHANNEL Calls menu M3 directly — or causes it to be displayed when
the Readout Marker key is pressed — if there is no active
marker. Or to it calls or causes menu M4 to be displayed if
there is an active marker. If in delta reference mod, menu M5
is displayed.
None
ACTIVE MARKERS
ON ALL CHANNELS Calls menu M6 directly —or causes it to be displayed when
the Readout Marker key is pressed. None
SEARCH Calls menu M7 directly —or causes it to be displayed when
the Readout Marker key is pressed. None
FILTER
PARAMETERS Calls menu M8 directly —or causes it to be displayed when
the Readout Marker key is pressed. None
MARKER MODE None
CONTINUOUS Marker values are interpolated between data points,
Interpolated markers are allowed only when the horizontal
axis of the display is FREQUENCY. Interpolated markers are
not allowed in CW, Time Domain, or Power Sweep. If a
channel has been set to interpolated markers and the sweep
is changed to CW or Power Sweep, the markers will
automatically revert to normal mode (DISCRETE). Time
Domain will ignore CONTINUOUS mode. Interpolated markers
are allowed in any graph type, as long as the sweep is by
frequency.
MKRC; MKRX?
DISCRETE Markers are displayed only at actual measured data point
values. MKRD; MKRX?
SET MARKERS Calls menu M1, which lets you set marker parameters. None
PRESS <ENTER>
TO SELECT Pressing the Enter key implements menu selection. None
Menu M9, Marker Readout Functions