A-242 37xxxE OM

T ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
SET D.C. TERM FOR
LOWPASS PROCESSING Since it is impossible to measure the true D.C. term
required for lowpass processing, a value must be
estimated. This menu allows a choice between five different
selections for this value.
None
AUTO
EXTRAPOLATE Sets the D.C. term to a value determined by extrapolating
the data points near the zero frequency. DCA; DCX?
LINE
IMPEDANCE Sets the D.C. term to the characteristic impedance of the
transmission medium (Z0). DCZ
OPEN Sets the D.C. term to correspond to an open circuit. DCO
SHORT Sets the D.C. term to correspond to a short circuit. DCS
OTHER
XXX.XXX
(REFLECTION
COEFFICIENT
X.XXX pU)
Sets the D.C. term to the value entered. DCV; DCV?
DCX?
PREVIOUS MENU Returns you to the previous menu. None
PRESS <ENTER>
TO SELECT Pressing the Enter key implements your menu selection. None
Menu TD6, Set D.C. Term for Low Pass Processing