37xxxE OM A-249

ALPHABETICAL LISTING U
MENU DESCRIPTION GPIB COMMAND
CALIBRATION
COMPONENT
UTILITIES
None
INSTALL KIT
INFORMATION
FROM USB
Reads into memory the coefficient data from the
calibration-components USB supplied with the calibration
kits.
LKT
DISPLAY COAXIAL
OPEN & SHORT
INFORMATION
Calls menu U4 and U4A, which lets you display the
connector information for the various coaxial connectors
supported.
None
DISPLAY COAXIAL
OFFSET SHORT
INFORMATION
Calls menu U4B, which lets you display the connector
information for the various coaxial connectors supported. None
DISPLAY
WAVEGUIDE
INFORMATION
Displays the waveguide information loaded from the USB
drive. DWG
PRESS <ENTER>
TO SELECT Pressing the Enter key implements your menu selection. None
Menu U3, Calibration Component Utilities
SSLT AND SSST WAVEGUIDE PARAMETERS
IDENTIFIER NOT INSTALLED
CUTOFF FREQUENCY XXX.XXXXXX GHz
OFFSET LENGTH OF SHORT 1 +XXX.XXXX mm
OFFSET LENGTH OF SHORT 2 +XXX.XXXX mm
OFFSET LENGTH OF SHORT 3 +XXX.XXXX mm
Menu EXT_U3, SSLT and SSST Waveguide Parameters