A-240 37xxxE OM

T ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
GATE None
START
XXX.XXX xx Sets the start time of the gate. GST; GST?
STOP
XXX.XXX xx Sets the stop time of the gate. GSP; GSP?
CENTER
XXX.XXX xx Sets the center time of the gate. GCT; GCT?
SPAN
XXX.XXX xx Sets the span (Stop - Start) of the gate. Also, provides for
an anti-gate if a negative value is entered. Refer to Chapter
9, paragraphs 9-6 and 9-7 for additional information.
GSN; GSN?
SET SHAPE
XXXXXXXXX Calls a menu that lets you set the shape of the gate. None
GATE ON/OFF/DISP Switches the gate on or off each time Enter is pressed. GON/GOF/GDS;
GOF?
SET RANGE Takes you back to menu TD2_XX_XXXX (LP_TIME,
LP_DIST, BP_TIME, BP_DIST), depending on the type of
measurement you selected in menu TD1.
None
PRESS <ENTER>
TO SELECT Pressing the Enter key implements your menu selection. None
Menu TD4_TIME & TD4_DIST, Gate (Distance/Time)