Anritsu 37xxxE 37xxxE OM A-37

37xxxE OM A-37
ALPHABETICAL LISTING C
MENU DESCRIPTION GPIB COMMAND
CONFIRM
CALIBRATION
PARAMETERS
Used for LRL/LRM method, waveguide line type. None
LRL/LRM
PARAMETERS Calls menu C18, which lets you change LRL/LRM parameters. None
WAVEGUIDE
CUTOFF FREQ Calls menu 15B, which lets you enter a waveguide cutoff frequency. None
TEST SIGNALS Calls menu CAL_SU2, which lets you enter calibrate Flat
Test Port Power or change source power(s) and attenuator
settings.
None
START CAL Starts the LRL/LRM calibration sequence using waveguide
standards. BEG
PRESS <ENTER>
TO SELECT
OR CHANGE
Pressing the Enter key implements your menu selection. None
Menu C3F, Confirm Calibration Parameters