SYSTEM STATE KEY-GROUP FRONT PANEL OPERATION
4-34 37xxxE OM
Function Default Setting
Instrument
State Measurement Setup Menu Displayed
Measurement Maximum sweep range of source and test set
Source Power: Model Dependent
Resolution: Normal (401 points)
Channel Quad (four-channel) display
Channel 1 active
Display Channel 1: S11, 1:1 Smith Chart
Channel 2: S12, Log Magnitude and Phase
Channel 3: S21, Log Magnitude and Phase
Channel 4: S22, 1:1 Smith Chart
Scale: 10 dB/Division or 90/Division
Offset: 0.000dB or 0.00 degree
Reference Position: Midscale
Electrical Delay: 0.00 seconds
Dielectric: Air (1.000649)
Normalization: Off
Normalization Sets: Erased
Enhancement Video IF Bandwidth: Normal
Averaging: Off
Smoothing: Off
Calibration Correction: Off and Calibration erased
Connector: K Connector
Load: Broadband
Markers/Limits Markers On/Off: All off
Markers Enabled/Disabled: All enabled
Marker Frequency: All set to the start-sweep frequency
(or start -time distance)
DReference: Off
Limits: All set to reference position value (all off all en-
abled)
System State GPIB Addresses: Unchanged
Frequency Blanking : Disengaged,
Error(s): GPIB SRQ errors are cleared, Service Log
errors are not cleared
Measurement: Restarted
Table 4-2. Default Settings