Anritsu 37xxxE 37xxxE OM 8-57

Step 16. Move cursor to RETURN TO SWEPT
FREQUENCY MODE and press Enter to exit the
gain compression mode.
Step 17. Press the Appl key to return to the TEST SIGNALS
menu (left), highlight EXIT APPLICATION and
press Enter to exit the gain compression measure-
ment area.
CAUTION
When exiting the Swept Frequency Power Gain Compres-
sion mode, the DUT should be turned off, unless the user
has selected the proper attenuator settings for standard
swept frequency (S-parameter) operation.
MEASUREMENTS GAIN COMPRESSION
37xxxE OM 8-57
MENU SU2
TEST SIGNALS
POWER CONTROL
5.47 dB
0 TO –20.00 dB
PORT 1 ATTN
0*10dB(0–70)
PORT 1 POWER
–1.53 dBm
PORT 2 ATTN
0 * 10 dB (0 –40)
CALIBRATE
FOR FLATNESS
(CAL EXISTS)
FLATNESS
CORRECTION
AT –11.53 dBm
PORT 2 POWER
0.00 dBm
EXIT APPLICATION
PRESS <ENTER>
TO SELECT
OR TURN ON/OFF