37xxxE OM A-59

ALPHABETICAL LISTING C
MENU DESCRIPTION GPIB COMMAND
SELECT
WAVEGUIDE
KIT TO USE
None
-INSTALLED KIT- The lines below indicate the characteristics of the installed
waveguide calibration kit, if applicable. None
IDENTIFIER
XXXX Displays the type of waveguide used. WGSER?
CUTOFF FREQ:
XXX.XXXXXXXXX GHz Displays the cutoff frequency of the waveguide. WGCUTOFF?
SHORT 1
XX.XXXXmm Displays the offset length of the first calibration short. WGSHOFF1?
SHORT 2
XX.XXXXmm Displays the offset length of the second calibration short. WGSHOFF2?
USE INSTALLED
WAVEGUIDE KIT Move the cursor to this line and press Enter to use the
displayed kit. WK1; WKX?
USER DEFINED Calls menu C15A, which lets you modify the parameters. None
PRESS <ENTER>
TO SELECT Pressing the Enter key implements your menu selection. None
Menu C15, Select Waveguide Kit to Use