A-14 37xxxE OM

A ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
AUTOCAL
S11 1 PORT None
PORT 1
CONNECTION
LEFT/RIGHT
Switch between the side of the AutoCal module which is
connected to Port 1 (default LEFT). ACL1R2; ACR1L2
TEST SIGNALS Calls menu CAL_SU2, which lets you enter calibrate Flat
Test Port Power or change source power(s) and attenuator
settings.
None
START AUTOCAL Calls menu CAL_SEQ, which starts the AutoCal calibration
sequencing. None
PRESS <ENTER>
TO SELECT
OR SWITCH
Press the Enter key to select or switch. None
Menu ACAL_S11 1 PORT, AutoCal S11 1 Port Menu