37xxxE OM A-153

ALPHABETICAL LISTING M
MENU DESCRIPTION GPIB COMMAND
SELECT
READOUT MARKER None
MARKER 1
XXX.XXXXXXXXX GHz Displays the frequency and S-Parameter value(s) of
Marker 1 on all displayed graphs and Smith Charts. The
frequency of Marker 1 also displays here. If Marker 1
was activated in menu M2 as the REF marker, REF
appears as shown for Marker M5 below.
DR1; DRX?
MARKER 2
XXX.XXXXXXXXX GHz Same as above, but for Marker 2. DR2; DRX?
MARKER 5
XXX.XXXXXXXXX GHz Same as above, but for Marker 5 This display is
representative if Markers 1, 2, and 5 are selected.
Markers 3, 4, and 6 would also show, if they had been
selected.
DR5; DRX?
DREF MODE IS ON (OFF) Indicates the status of the DREF mode. DRO; DRO?
PRESS <ENTER>
TO SELECT Pressing the Enter key implements your menu selection. None
Menu M3, Select Readout Marker