37xxxE OM A-33
ALPHABETICAL LISTING C
MENU DESCRIPTION GPIB COMMAND
CONFIRM
CALIBRATION
PARAMETERS
Used for Offset-Short method and waveguide line type. None
WAVEGUIDE
PARAMETERS
XXXXXX
Calls menu C15, which lets you enter waveguide
parameters. None
REFLECTION
PAIRING
XXXXXX
Calls menu C13A for a SSLT calibration or calls
menu C13B for a SSST calibration, which lets you select
the pairing (mixed or matched) for the types of reflection
devices (open/short) that you will use on Ports 1 and 2 for
calibration.
None
LOAD TYPE
XXXXXXXX Calls menu C6, which displays type of load selected for
calibration—broadband fixed or sliding. Load type does not
appear for the SSST method.
None
THROUGH LINE
PARAMETERS Calls menu C20, which lets you enter throughline
parameters—including offset length and loss equation
coefficients.
None
TEST SIGNALS Calls menu CAL_SU2, which lets you calibrate Flat Test
Port Power or change source power(s) and attenuator
settings.
None
START CAL Starts the offset-short calibration sequence using
waveguide standards. BEG
PRESS <ENTER>
TO SELECT
OR CHANGE
Pressing the Enter key implements your menu selection. None
Menu C3B, Confirm Calibration Parameters