A-238 37xxxE OM

T ALPHABETICAL LISTING
MENU DESCRIPTION GPIB COMMAND
BANDPASS DISTANCE
DISPLAY SETUP None
START
XXX.XXX mm Sets the start time of the display. ZST; ZST?
STOP
XXX.XXX mm Sets the stop time of the display. ZSP; ZSP?
CENTER
XXX.XXX mm Sets the center time of the display. ZCT; ZCT?
SPAN
XXX.XXX mm Sets the span (Stop - Start) of the display. ZSN; ZSN?
MARKER RANGE Calls a menu that lets you set the display to a range
determined by two of the markers. None
PHASOR ON/OFF
IMPULSE Switches Phasor Impulse processing on or off each time
Enter is pressed. TDPI1; TDPI0;
TDPIX?
HELP – PHASOR
IMPULSE Displays an informational help menu. None
MORE Calls a menu that contains additional selections for display
setup. None
RELATIVE VELOCITY
X.X Indicates the relative velocity of light, as set by the
dielectric constant in menu RD2. None
PRESS <ENTER>
TO SELECT
OR TURN ON/OFF
Pressing the Enter key implements your menu selection. None
Menu TD2_BP_DIST, Bandpass Distance Display Setup