Apple 2300 Series manual If it isn’t, click Switch Disk until the correct disk name appears

9Start up your computer from the first system software installer disk you made with Floppy Disk Maker.

The Installer’s Welcome screen appears. You may have to double-click the System Software Installer icon to open the Installer program.

10Click OK.

The Easy Install dialog box appears. (The dialog box that appears on your screen may not look exactly like this one.)

Parts of system software to be installed

Disk on which system software will be installed

Click here to install the software you need.

Click here to install on a different disk.

11Make sure that the hard disk named in the box is the one on which you want to install system software.

If it isn’t, click Switch Disk until the correct disk name appears.

12Click Install.

13Follow the instructions that appear on the screen.

You’ll see messages asking you to insert different disks.

14When you see a message reporting that the installation was successful, click Restart.

If, after reinstalling system software by doing a normal installation, you still experience problems with your computer, follow the steps in the next section for doing a “clean” installation of system software.

Diagnostic Techniques 115