Asante Technologies 5308F user manual Adding an Rmon Alarm Group Entry

Advanced Management

Adding an RMON Alarm Group Entry

To add an Alarm Group Entry:

▲Important! The Alarm Group requires implementation of the Event Group. You must have an Event Group entry created BEFORE you can add an Alarm Group entry. See “Add RMON Event Group Entry” on page 7-16 for instructions.

1 Type a from the RMON Alarm Group Menu. Command prompts, similar to those shown in Figure 7-7, appear one at a time on the screen.

Command Prompts

Figure 7-7	Add RMON Alarm Group entry
2	Enter the information requested for each
	prompt, following the guidelines below.

Sampling Interval

Enter the number (in seconds) for which data is to be sampled.

This value can be set to any number of seconds between 1 and 3600 (1 hour).

Page 7-10