Advanced Management
Displaying an RMON History Control Group Entry
To display an RMON History Control Group entry:
▲Important! There must be at least one History Control Group entry in the system in order to display information for an entry. To add a His- tory Control Group entry, see “Adding an RMON History Control Group Entry” on page
1
2
3
Type p from the RMON History Group menu.
Enter the number of the RMON History Group entry to be displayed.
Press return.
A screen similar to Figure
Figure 7-4 Display RMON History Control Group entry
Interface
The number of the port for which statistics are displayed.
Requested Buckets
The requested number of discrete time intervals over which data is to be saved. This number can be between 1 and 10.
Granted Buckets
The number of discrete sampling intervals over which data shall be saved in the part of the
Page
