Advanced Management
Adding an RMON Event Group Entry
This option allows you to add an Event Group entry.
To add an Event Group Entry:
1 Type a from the RMON Event Group Menu. Command prompts, similar to those shown in Figure
Command Prompts
Figure 7-11 Add RMON Event Group entry
2 | Enter the information requested for each |
| prompt, following the guidelines below. |
Event Description
Enter a description of the event.
Event Type
Enter the type of event to occur upon a threshold violation.
Options are:
❏none — no action is taken.
❏log — records the alarm in the RMON Event Group Entry Log.
❏trap — sends a trap to the SNMP trap receiver (specified in the SNMP parameters menu).
❏log and trap — records the alarm and sends a trap to the SNMP trap receiver.
Page
