
Configure Port Parameters
Current Settings
Table
❏“Enabling/Disabling a Port” — page
❏“Configuring Full Duplex” — page
❏“Configuring
Table 5-9 Port Parameter Settings
Setting | Description |
|
|
Port Number | The number of the port for which information is |
| displayed. |
Port Connection | The administrative status of the port’s connection. |
| ❏ Enabled — the port is enabled and |
| can receive and forward packets. |
| ❏ Disabled — the port is disabled and |
| cannot receive any packets (even if |
| the port’s Link Status is ON). |
Link Status | The status of the port. |
| ❏ On — a network device is properly |
| connected to the selected port and is |
| powered on. |
| ❏ Off — no network device is con- |
| nected to the port. |
Port | |
Ability |
|
Port Speed | Manually determines the speed of the selected port. |
| The |
| transmitting at 10Mbps; the 10/100TX port and |
| installed MII modules (except |
| to transmit at 100Mbps. |
| ▲ Important! If you manually change the speed on |
| a port, |
| automatically disabled. |
Link Mode
The port’s link mode (half or full duplex).
Page