| Configure SNMP Parameters | |
Table | ||
|
|
|
Setting | Description |
|
|
|
|
SNMP Read | The IntraSwitch 5308FL’s SNMP read | |
Community | community string. | |
| The read community string is a single word | |
| that defines access rights for reading SNMP | |
| data objects. | |
| The default setting is public. | |
SNMP Write | The IntraSwitch 5308FL’s SNMP write | |
Community | community string. | |
| The write community string is a single word | |
| that defines access rights for writing SNMP | |
| data objects. | |
| The default setting is private. | |
Trap Authentication | The status of the SNMP agent to generate | |
| authentication traps. | |
| Note: An authentication trap occurs when a | |
| network station with an invalid community | |
| string attempts to access the IntraSwitch | |
| 5308FL. | |
| The default setting is disabled. | |
SNMP Trap Receivers | The IP addresses of the network management | |
| stations that can receive traps. Normally, | |
| these addresses are the same as your network | |
| management software systems’ IP | |
| address(es). | |
| Important! A maximum of four traps | |
| receivers is allowed. | |
|
|
|
Page